PARRA No. 971 Ironclad Hard Case

PARRA
Code: PRA-097
£34.99
  • Waterproof IP67
  • Impact Resistant
  • Pick n' Pluck Foam

The Ironclad is a wide and deep Hard Case made from seriously strong Polypropylene (PP) + Glass Fibre filled with four layers of Pick and Pluck Foam, so that you can customise it to suit your needs perfectly. With a Water and Dustproof seal, IP67 Waterproof Rating, Crush and Impact protection as well as Extreme Temperature performance and a Pressure Equaliser Valve, this is the best way to protect important items during transit and storage.

Full description

Description

The Ironclad Hard Case from PARRA is a larger sized Hard Case made from strong materials, that is ideally shaped/sized to contain a huge array of equipment from Camera Lenses/Accessories to Drone, Optical and Night Vision Equipment. The case has generous overall dimensions but is still easy to carry on your person thanks to the Grab Handle, or to put in storage in cupboards, under beds and in the boot of the Car. The strength of the Ironclad Case is made possible thanks to its Polypropylene (PP) + Glass Fibre construction and reinforced sections, giving it the durability it needs in all the right places, and a rubber seal which protects the contents from dust and liquids. The handle of the case can be folded away to make it even more compact in storage, and the hinges are supported by Stainless Steel pins to ensure long-life performance.

The case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with four thick pick and pluck layers, allowing you to customise the shape of the foam to achieve the perfect fit around your precious valuables. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as for a collection of Riflescopes, or a Drone with delicate blades for example.

The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.

The case features heavy duty clasps designed to keep the case secure, with two strong dual movement clasps which make the case easy to open, but give an extremely strong lock for transport. If you're worried about tampering the case also features two pad-lock holes, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone trying to get a sneaky look inside.

The case also features an adjustable air valve which is designed to release pressure for transport by air, or in situations with high pressure such as at height. The valve is fully adjustable, but also water resistant, allowing you to adjust the amount of pressure allowed to equalise inside the case but without flooding the contents.

If you regularly travel and need to transport larger equipment such as entire cameras, several Hard Disks or any kind of expensive components that you want to be assured is safe from extreme temperatures, submersion in water, dust, shock, impacts and even the pesky folks at the Transport Safety Authority, then the PARRA Ironclad Hard Case is perfect.

Features

  • Perfect for Cameras/Drones/Riflescopes
  • Great for compact, long term storage
  • Eggshell foam lid insert
  • Four Pick and Pluck storage inserts
  • Base separator foam piece protection
  • Easily slides under beds, or fits in cupboards
  • IP Rated up to IP 67
  • Dust Tight Case to protect the contents
  • Protected against water submersion up to 1m for 30 mins
  • Rubber seal for an extra tight seal when closed
  • Secured using two dual movement clasps
  • Folding low profile carry handle
  • Padlock holes for using a TSA lock or during storage
  • Reinforced where needed
  • Impact Resistant
  • Protects in low temperatures down to -40°c
  • Protects in high temperatures up to 90°c
  • Stainless steel hinge pins
  • Manual pressure air valve which resists water
  • Heavy Duty Polypropylene (PP) + Glass Fibre construction
  • Transport equipment with peace of mind

Package Includes

  • PARRA No. 971 Ironclad Hard Case
  • Egg-shell foam lid insert
  • Foam Separator base insert
  • Four Pick-Pluck foam storage inserts

Specification

General

Colour Wheel Greyscale
Item Colour
Black
Material Icon
Material
  • Fiberglass
  • Polypropylene
Product Length
Approx.20cm
Product Width
Approx.25.5cm
Product Height
Approx.25cm

Case Related

General

Recommended For
  • Attatchments
  • Tools
  • Pistol

Case Features

Ratings
IP Rating
IP67
Certificate Issuer
Intertek
Certificates
Waterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7
Impact Resistance Test - ATA300 Revision 8.0 B-2-5
Immersion MIL-STD-810 F Notice 3 Method 512.4
Low Temperature IEC60068-2-1 Sixth Edition
High Temperature IEC60068-2-2 Fifth Edition
Protection
Waterproofing
Icon - Waterproof
Waterproof
Dust Proof
Yes
Shockproof
Yes
Air Valve
Yes
Rubber Seal
Yes
Minimum Temperature
-40°c
Maximum Temperature
90°c
Padding
Padded
Yes
Padding Material
Soft Foam
Padding Type
  • Egg Shell Foam Lid Insert
  • PIck and Pluck Base Foam Layer x 4
  • Lid Separator Padding x 2
  • Thin Base Separator Padding
Latches
Latch Types
Dual Movement Clasp
Latch Count
2
Handles
Grab Handle
Yes
Handle Type
Rubberised Carry Handle
Wheels
Has Wheels
No
Security
Security Features
Padlock Holes

Dimensions & Weight

Weight
Weight KG Icon
Weight (KG)
Approx.1.541kg
Weight With Padding
1.683kg
External
External Length
Approx.27.5cm
External Width
Approx.26.3cm
External Height
Approx.25cm
Internal
Internal Corner Radius
Approx.20mm
Base
Base Internal Depth
Approx.20.5cm
Base Internal Lower Length
Approx.26.4cm
Base Internal Lower Width
Approx.17.5cm
Base Upper Length
Approx.26.3cm
Base Upper Width
Approx.17cm
Lid
Lid Internal Depth
Approx.2.3cm
Lid Lower Length
Approx.26.5cm
Lid Lower Width
Approx.16.9cm
Lid Upper Length
Approx.26.5cm
Lid Upper Width
Approx.16.9cm
Usage
Tool