PARRA No. 345 Ferret Hard Case

PARRA
Code: PRA-035
£19.99
  • IP 67 Waterproof
  • Compact & Tough
  • Independently Tested

The Ferret Hard Case is a compact yet incredibly tough Hard Case which can be used to transport and store any items that you want to keep protected from ingress of Water and Dust, as well as from Extreme Temperatures and rough Impacts. Independently tested by third party quality assurance company, Intertek, you can be sure that it lives up to its claims.

Full description

Description

PARRA Cases manufacture and supply a huge range of Protective Hard Cases that are third-party certified to protect from Water ingress up to 1m for 30 minutes, Dust, as well as Extreme Temperatures from -40°C to 90°C and Impact/Crush protection. The Ferret Hard Case is a compact addition to the line-up, and offers two thick layers of Pick and Pluck foam inside, so that you can cut the case to your exact specification and keep your valuables in place and secure. The Polypropylene (PP) + Glass Fibre construction assures total protection from impact, and a modular/stackable design allows you to neatly store your cases under beds, in cupboards, the boot of the car... wherever! The convenient folding Grab Handle makes it easy to carry on your person, and makes it extra compact when storing.

The Ferret Case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with two thick pick and pluck layers, allowing you to customise the shape of the foam to achieve the perfect fit around your precious valuables. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as for a collection of electronics, Hard Drives, Camera Equipment or a Drone with delicate blades for example.

The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.

The case features heavy duty clasps designed to keep the case secure, with two strong single movement clasps which make the case easy to open, but give an extremely strong lock for transport. If you're worried about tampering the case also features two pad-lock holes, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone trying to get a sneaky look inside.

The case also features an adjustable air valve which is designed to release pressure for transport by air, or in situations with high pressure such as at height. The valve is fully adjustable, but also water resistant, allowing you to adjust the amount of pressure allowed to equalise inside the case but without flooding the contents.

No matter what you need to transport, if you want to do it conveniently, conserving as much space as possible, and with total protection from Extreme Temperatures, Dust, Water and Impacts, then the Ferret Hard Case from PARRA is the way to go.

Features

  • Ideal for Camera/Computer/Drone equipment
  • Suits a huge range of purposes
  • Compact sized Polypropylene (PP) + Glass Fibre hard case
  • Great for compact, long term storage
  • Eggshell foam lid insert
  • Two Pick and Pluck storage inserts
  • Base separator foam piece protection
  • Easily slides under beds, or fits in cupboards
  • IP Rated up to IP 67
  • Dust Tight Case to protect the contents
  • Protected against water submersion up to 1m for 30 mins
  • Rubber seal for an extra tight seal when closed
  • Secured using two single movement clasps
  • Folding low profile carry handle
  • Padlock holes for using a TSA lock or during storage
  • Reinforced where needed
  • Impact Resistant
  • Protects in low temperatures down to -40°c
  • Protects in high temperatures up to 90°c
  • Stainless steel hinge pins
  • Manual pressure air valve which resists water
  • Heavy Duty Polypropylene (PP) + Glass Fibre construction
  • Transport equipment with peace of mind

Package Includes

  • PARRA No. 345 Ferret Hard Case
  • Egg-shell foam lid insert
  • Foam Separator base insert
  • Two Pick-Pluck foam storage inserts

Specification

General

Colour Wheel Greyscale
Item Colour
Black
Material Icon
Material
PP
Product Length
Approx.25.2cm
Product Width
Approx.21.8cm
Product Height
Approx.12.2cm

Case Related

General

Recommended For
  • Attatchments
  • Small Electronics
  • Hard Drive
  • Sights

Case Features

Ratings
IP Rating
IP67
Certificate Issuer
Intertek
Certificates
Waterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7
Impact Resistance Test - ATA300 Revision 8.0 B-2-5
Immersion MIL-STD-810 F Notice 3 Method 512.4
Low Temperature IEC60068-2-1 Sixth Edition
High Temperature IEC60068-2-2 Fifth Edition
Protection
Waterproofing
Icon - Waterproof
Waterproof
Dust Proof
Yes
Crush Proof
Yes
Air Valve
Yes
Rubber Seal
Yes
Minimum Temperature
-40°c
Maximum Temperature
90°c
Padding
Padded
Yes
Padding Material
Soft Foam
Padding Type
  • Thin Base Separator Padding
  • Egg Shell Foam Lid Insert
  • Pick and Pluck Separator Foam x 2
Latches
Latch Types
Single Movement Clasp
Latch Count
2
Handles
Grab Handle
Yes
Handle Type
Rubberised Carry Handle x 1
Wheels
Has Wheels
No
Security
Security Features
Padlock Holes

Dimensions & Weight

Weight
Weight KG Icon
Weight (KG)
Approx.0.83kg
Weight With Padding
0.9kg
External
External Length
Approx.25.2cm
External Width
Approx.21.8cm
External Height
Approx.12.2cm
Internal
Internal Corner Radius
Approx.5.27mm
Base
Base Internal Depth
Approx.7.56cm
Base Internal Lower Length
Approx.20.2cm
Base Internal Lower Width
Approx.13.8cm
Base Upper Length
Approx.22.6cm
Base Upper Width
Approx.16.1cm
Lid
Lid Internal Depth
Approx.3.14cm
Lid Lower Length
Approx.20.5cm
Lid Lower Width
Approx.14.2cm
Lid Upper Length
Approx.22.6cm
Lid Upper Width
Approx.16cm
Usage
Camera, Electronics, Adventure,